java.io.InputStream
cz.dhl.ftp.FtpInputStream
java.lang.Object
Allows reading from FTP file.
Ftp,
FtpFile| Constructor Summary | |
FtpInputStream(FtpFile file)
Open 'retreive' InputStream for given filename. |
|
FtpInputStream(FtpFile file,
FtpConnect connect,
CoConsole console)
Open 'retreive' concurent InputStream for given filename. |
|
| Method Summary | |
int |
available()
Returns the number of bytes that can be read (or skipped over) from this input stream without blocking by the next caller of a method for this input stream. |
void |
close()
Close current data transfer and close data connection. |
void |
mark(int readlimit)
Marks the current position in this input stream. |
boolean |
markSupported()
Tests if this input stream supports the mark and
reset methods. |
int |
read()
Reads the next byte of data from the input stream. |
int |
read(byte[] b)
Reads some number of bytes from the input stream and stores them into the buffer array b. |
int |
read(byte[] b,
int off,
int len)
Reads up to len bytes of data from the input stream into
an array of bytes. |
void |
reset()
Repositions this stream to the position at the time the mark method was last called on this input stream.
|
long |
skip(long n)
Skips over and discards n bytes of data from this input
stream. |
| Methods inherited from class java.lang.Object |
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait |
| Constructor Detail |
public FtpInputStream(FtpFile file)
throws java.io.IOException
RETR - retrieve
This command causes the server-DTP to transfer a copy of the file, specified in the pathname, to the server or user-DTP at the other end of the data connection. The status and contents of the file at the server site shall be unaffected.
file - the file to be opened for reading
java.io.IOException - socket error
FileNotFoundException - Server file not found.
public FtpInputStream(FtpFile file,
FtpConnect connect,
CoConsole console)
throws java.io.IOException
Single ftp connection cannot handle multiple concurent data transfers. This limitation can be eliminated by creating new ftp connection for each concurent data transfer. This constructor creates separate Ftp instance.
Note (1) supplying same CoConsole instance for multiple sessions will produce messed output.
Note (2) This code may need to be run in separate thread to process multiple files concurently.
RETR - retrieve
This command causes the server-DTP to transfer a copy of the file, specified in the pathname, to the server or user-DTP at the other end of the data connection. The status and contents of the file at the server site shall be unaffected.
file - the file to be opened for readingconnect - login detailsconsole - message output
java.io.IOException - socket errorFtpInputStream(FtpFile)| Method Detail |
public int available()
throws java.io.IOException
The available method for class InputStream
always returns 0.
java.io.IOException - if an I/O error occurs.
public void close()
throws java.io.IOException
If no reply ABOR - abort
This command tells the server to abort the previous FTP service command and any associated transfer of data. No action is to be taken if the previous command has been completed (including data transfer). The control connection is not to be closed by the server, but the data connection must be closed. There are two cases for the server upon receipt of this command:
(1) the FTP service command was already completed. The server closes the data connection (if it is open) and responds with a 226 reply, indicating that the abort command was successfully processed.
(2) the FTP service command is still in progress. The server aborts the FTP service in progress and closes the data connection, returning a 426 reply to indicate that the service request terminated abnormally. The server then sends a 226 reply, indicating that the abort command was successfully processed.
java.io.IOException - socket errorpublic void mark(int readlimit)
reset method repositions this stream at the last marked
position so that subsequent reads re-read the same bytes.
The readlimit arguments tells this input stream to
allow that many bytes to be read before the mark position gets
invalidated.
The general contract of mark is that, if the method
markSupported returns true, the stream somehow
remembers all the bytes read after the call to mark and
stands ready to supply those same bytes again if and whenever the method
reset is called. However, the stream is not required to
remember any data at all if more than readlimit bytes are
read from the stream before reset is called.
readlimit - the maximum limit of bytes that can be read before
the mark position becomes invalid.reset()public boolean markSupported()
mark and
reset methods.
true if this true type supports the mark and reset
method; false otherwise.mark(int),
reset()
public int read()
throws java.io.IOException
int in the range 0 to
255. If no byte is available because the end of the stream
has been reached, the value -1 is returned. This method
blocks until input data is available, the end of the stream is detected,
or an exception is thrown.
-1 if the end of the
stream is reached.
java.io.IOException - if an I/O error occurs.
public int read(byte[] b)
throws java.io.IOException
b. The number of bytes actually read is
returned as an integer. This method blocks until input data is
available, end of file is detected, or an exception is thrown.
If b is null, a
NullPointerException is thrown. If the length of
b is zero, then no bytes are read and 0 is
returned; otherwise, there is an attempt to read at least one byte. If
no byte is available because the stream is at end of file, the value
-1 is returned; otherwise, at least one byte is read and
stored into b.
The first byte read is stored into element b[0], the
next one into b[1], and so on. The number of bytes read is,
at most, equal to the length of b. Let k be the
number of bytes actually read; these bytes will be stored in elements
b[0] through b[k-1],
leaving elements b[k] through
b[b.length-1] unaffected.
If the first byte cannot be read for any reason other than end of
file, then an IOException is thrown. In particular, an
IOException is thrown if the input stream has been closed.
The read(b) method for class InputStream
has the same effect as:
read(b, 0, b.length)
b - the buffer into which the data is read.
-1 is there is no more data because the end of
the stream has been reached.
java.io.IOException - if an I/O error occurs.read(byte[], int, int)
public int read(byte[] b,
int off,
int len)
throws java.io.IOException
len bytes of data from the input stream into
an array of bytes. An attempt is made to read as many as
len bytes, but a smaller number may be read, possibly
zero. The number of bytes actually read is returned as an integer.
This method blocks until input data is available, end of file is detected, or an exception is thrown.
If b is null, a
NullPointerException is thrown.
If off is negative, or len is negative, or
off+len is greater than the length of the array
b, then an IndexOutOfBoundsException is
thrown.
If len is zero, then no bytes are read and
0 is returned; otherwise, there is an attempt to read at
least one byte. If no byte is available because the stream is at end of
file, the value -1 is returned; otherwise, at least one
byte is read and stored into b.
The first byte read is stored into element b[off], the
next one into b[off+1], and so on. The number of bytes read
is, at most, equal to len. Let k be the number of
bytes actually read; these bytes will be stored in elements
b[off] through b[off+k-1],
leaving elements b[off+k] through
b[off+len-1] unaffected.
In every case, elements b[0] through
b[off] and elements b[off+len] through
b[b.length-1] are unaffected.
If the first byte cannot be read for any reason other than end of
file, then an IOException is thrown. In particular, an
IOException is thrown if the input stream has been closed.
The read(b, off, len) method
for class InputStream simply calls the method
read() repeatedly. If the first such call results in an
IOException, that exception is returned from the call to
the read(b, off, len) method. If
any subsequent call to read() results in a
IOException, the exception is caught and treated as if it
were end of file; the bytes read up to that point are stored into
b and the number of bytes read before the exception
occurred is returned. Subclasses are encouraged to provide a more
efficient implementation of this method.
b - the buffer into which the data is read.off - the start offset in array b
at which the data is written.len - the maximum number of bytes to read.
-1 if there is no more data because the end of
the stream has been reached.
java.io.IOException - if an I/O error occurs.read()
public void reset()
throws java.io.IOException
mark method was last called on this input stream.
The general contract of reset is:
markSupported returns
true, then:
mark has not been called since
the stream was created, or the number of bytes read from the stream
since mark was last called is larger than the argument
to mark at that last call, then an
IOException might be thrown.
IOException is not thrown, then the
stream is reset to a state such that all the bytes read since the
most recent call to mark (or since the start of the
file, if mark has not been called) will be resupplied
to subsequent callers of the read method, followed by
any bytes that otherwise would have been the next input data as of
the time of the call to reset. markSupported returns
false, then:
reset may throw an
IOException.
IOException is not thrown, then the stream
is reset to a fixed state that depends on the particular type of the
input stream and how it was created. The bytes that will be supplied
to subsequent callers of the read method depend on the
particular type of the input stream.
java.io.IOException - if this stream has not been marked or if the
mark has been invalidated.mark(int),
IOException
public long skip(long n)
throws java.io.IOException
n bytes of data from this input
stream. The skip method may, for a variety of reasons, end
up skipping over some smaller number of bytes, possibly 0.
This may result from any of a number of conditions; reaching end of file
before n bytes have been skipped is only one possibility.
The actual number of bytes skipped is returned. If n is
negative, no bytes are skipped.
n - the number of bytes to be skipped.
java.io.IOException - if an I/O error occurs.